IMPACT™ Solution for the Plastic Industry

Can't find a solution that meets your application needs? Click here to print an Engineering Evaluation request Form.  Fill out and fax the completed form to PPT at 952.996.9501.

WebEx™ player is required to view video demos. To download and install the Webex player use the link in the table below.

Download the Webex Player
3400 KB (6 min @ 56 Kbps)
When the download is complete, double-click the file to complete the installation.

Multi-camera Web Inspection

This solution uses eight IMPACT C-Series cameras to inspect the quality of tri-laminated conductive polymer materials. This provides 100% inspection of a 660 mm-wide polymer web moving at a speed of 20 meters per minute. The cameras communicate in a master-slave configuration so the information from all cameras is combined before the final pass/fail decisions are made.
View Application Notes
View Printable PDF

Plastic Extrusion Inspection

This solution uses an IMPACT 7200 high resolution C-Series camera (1024 X 768) to measure the dimensions of extruded plastic parts. To accommodate for the 100+ part types coming from the extrusion line, the system uses the C-Series processor's auto-trigger feature to track the part as it enters and exits the camera Field of View while measuring the part length.
View Application Notes
View Printable PDF